|
A. Material is picked up via a Multi- Vac Air Bleed Nozzle at a nozzle velocity of 4,000 to 7,000 cu. ft. per minute based on bulk density of your product. B. The product impacts the abrasion resistant target deflector. C. The heavy product drops from the air stream into the vacuum tight collection hopper. D. Now only dust-laden air travels vertically at a can velocity of approximately 40 to 175 cu. ft. per minute. Special attention in this area insures long filter life that will give long vacuum pump life. E. Air born dust is collected on the outside of the filter media. F. The “on demand” programmable reverse pulse jet filter cleaning system ensures continuous operation—the machine does not have to be shutdown for filter cleaning. G. Clean air then passes in the vacuum
pump inlet. The discharge air then passes through a large silencer located
in a modular Power Pack.™ 21209 Durand
Ave • Union Grove, WI 53182-9711 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|||||||||||||
 |
 |
 |
 |
 |
 |
 |
|||||||
 |
 |
 |
 |
 |
 |
||||||||
 |
 |
 |
 |
 |
|||||||||
